Intake

	In the spirit of racing, ESP Products has designed and produced an aluminum Mass Air Flow pipe and Inlet pipe. These pipes are a brushed aluminum, are less than half the weight of the steel pipes and also have a heat dissipating function. First used with our Front Mount Intercooler, the aluminum pipes created a nice finished look in the engine compartment and assisted with the dissipation of heat from the turbo's charged air. The inlet pipe is a 2-1/2" mandrel bent unit that is a direct replacement for stock, but without the "necked down" effect to restrict air flow. When matched with other ESP Products intake parts, you can have a 100% aluminum air intake system from the filter to the heads.
	ESP 4" MAF Pipe Bare	INT087	$135.00
	ESP 4" MAF Pipe Black	INT086	$145.50
	The plenum spacer, manufactured exclusively for ESP Products, is made of 1" thick aluminum.  This plenum spacer creates a shelf in your upper manifold to direct the air evenly to all cylinders. The increased volume given by the 1" thick spacer increases engine horsepower and torque. Gaines of 7-10 hp and 10-15 ft/lb. of torque are common. The spacer kit will include the spacer, gaskets, and longer hardware.
	ESP Plenum Spacer 1" (aluminum)	INT110	$75.00

 

P/N	Description		Retail	Member
INT001	STOCK AIR FILTER S&B		$32.90	$30.07
INT002	3"x 9" Perf. Open Air Filter w/ inverted cone		$54.00	$51.50
INT003	3"x12"Perf .Open Air Filter  w/inverted cone		$60.00	$57.00
INT004	4"x12"Perf .Open Air Filter  w/inverted cone		$64.00	$60.50
INT005	3.5"x 9" Perf. Open Air Filter w/ inverted cone		$56.00	$53.00
INT006	4"x 9" Perf. Open Air Filter w/ inverted cone		$58.00	$55.00
INT007	3.5"x 12" Perf. Open Air Filter w/ inverted cone		$62.00	$59.00
INT010	PASS. SIDE BREATHER		$19.95	$18.95
INT011	PASS. SIDE BREATHER – T/A		$17.00	$15.95
INT012	DRIVER SIDE BREATHER K&N (NEW DESIGN)		$32.00	$30.00
INT013	CLEANER SOLUTION 12.0 OZ K&N		$6.50	$5.99
INT014	FILTER OIL 8.0 OZ K&N		$6.00	$5.73
INT020	STAGE 3 CAM-V6 (GOOD TORQUE + TOPEND)		$169.00	$159.00
INT021	STAGE 4 CAM-V6 (HIGH TORQUE + TOPEND)		$169.00	$59.00
INT030	ESP GRIND CAM-V6 (550-625HP)		$179.00	$165.00
INT031	ESP RACE CAM-V6 (600-700HP)		$179.00	$165.00
INT040	ESP 3.8 STRIP HEADS (EXCHANGE) CNC		$1,299.00	$1,254.00
INT041	ESP 3.8 RACE HEADS (EXCHANGE) CNC		$1,399.00	$1,360.00
INT042	3.8 STREET HEADS 1.70/1.50 (EXCHANGE)		$900.00	$850.00
INT060	STOCK INTAKE MANIFOLD (FACTORY)		$309.00	$287.50
INT061	PORTED INTAKE MANIFOLD (EXCHANGE)		$200.00	$175.00
INT062	ESP BALANCED INTAKE MANIFOLD (EXCH)		$275.00	$250.00
INT070	ESP 62 mm T-BODY / MAN. KIT (EXCH)		$199.00	$189.50
INT074	70 mm Throttle Body & Plenum		$445.23	$430.00
INT080	ESP 3" MAF PIPE BARE ALUM 86-7’		$63.00	$58.60
INT081	ESP 3" MAF PIPE BLACK ALUM ’86-7		$66.00	$61.30
INT083	MAF PIPE BARE BLACK ’84-5		$105.00	$90.00
INT086	ESP 4" MAF PIPE BLACK ALUMINUM		$145.00	$130.00
INT087	ESP 4" MAF PIPE BARE ALUMINUM		$135.00	$121.00
INT090	1.55 V6 ROLLER ROCKERS (BILLET ALUM.)		$508.00	$489.00
INT091	1.65 V6 ROLLER ROCKERS (BILLET ALUM.)		$508.00	$489.00
INT110	ESP PLENUM SPACER (1" ALUMINUM)		$75.00	$65.00
INT140	ESP ALUMINUM INLET PIPE		$50.00	$44.50
INT141	ESP ALUMINUM INLET PIPE w. MAT Bung		$72.00	$61.20
INT150	INTERCOOLER HOSE KIT (STOCK 3 hoses/6clamps)		$36.00	$32.00
INT160	ESP ROLLER CAM SHAFT CUSTOM		$375.00	$355.00
INT161	COMPLETE ESP ROLLER CAM KIT		$890.00	$860.00
INT200	ALUMINUM "CHAMPION" CYLINDER HEADS		$1,695.00	$1,600.00

---