![]() |
|
||
| Home Why Pre-Lube? Pre-Luber Products Automotive FAQ
Oil-pan plug charts:
|
Industrial: The Engine Start Protection of the ESP-Luber lubrication systems work effectively on most diesel generators of all sizes. Our ESP industrial size systems are specifically designed for more severe applications. Our new Severe Duty ESP-Luber systems are now available, from ESP Products web site. These are designed for colder climates and the really big engines. Heavy Off-Road equipment, driven by the largest Caterpillar, Detroit, and Cummins engines, can be protected from the damages of cold starts and, with our Post-lubrication cycle, you will protect the turbochargers after shut-down. The timed Post-lubrication cycle featured by our ESP-Luber systems not only keeps the turbochargers cooler and lubricated after shut down, they also reduce idle time. The reduction of idle times can save you hundreds of dollars in fuel costs throughout the year. Custom applications have been created for the medical and other industries that require emergency start-up of their generators. ESP Products can customize your system to your specific needs. From standard toggle operated systems, to more complex systems that operate on a closed loop. Our ESP-Luber can lubricate your engine for 1-6 minutes every 1-6 hours, to provide an example). The fine tuning of the run and rest cycles is controlled by the user. These systems are available in both 12-volt and 24-volt application. We have customized 110-volt AC systems. Contact ESP Products for more details on 110 AC systems. Further details on system function and operation can be reviewed by reading the “Turbocharged” and “H.D. Diesel” links on the left of each page. FP97027 Severe Duty 24 volt ESP-Luber Suggested: Off-Road diesels & severe conditions FP97037 Super Duty 24 volt ESP-Luber Suggested: CAT 3600 & Equivelant ESP Products has supplied Pump/Motor assemblies to Drilling companies and has supplied complete systems to commercial farmers and construction companies for use on equipment and trucks. There are ESP-Luber systems installed on the generators of hospitals and major financial institutions as well. Contact an ESP-Luber lubrication system representative for specific applications and accessories. Accessories: Custom Programmed Electronic Control Module (ECM) - ESP Products can customize your ECM, if needed, beyond it's existing range. Closed loop operation has been the requested. With this new programming, ESP Products can set your lubrication cycle to run for "X" minutes and rest for "Y" hours. This too can be adjustable. Contact us for more details on this special order item. 1/2” Fitting kit - Includes all the basic brass fittings needed for the installation of a Pre/Post Lubrication kit. Drain Plug Adapter - Custom size and thread pitch for your individual oil pan application. Most popular sizes are available. See Chart. 1/2”Quick Disconnect - Can be used on the suction or pressure hoses for quicker oil changes. In-Line Filter - When a CFA cannot be utilized and you want the pre/post cycle oil to be filtered before it enters the engine. This small universal filter adapter can fit all applications. Filter element included. CFA - This Custom Filter Adapter fits under your factory spin-on oil filter. The 1” billet aluminum adapter can rotate 360° and allow the oil to enter the engine through your oil filter. Saves time and money. 1/2” Replacement Hose - High pressure and high temperature Push-Lok hose. Designed specifically for our fitting kit and to be used without clamps. Oil Analysis - Test your engine oil before and after you install a Pre/Post Lubrication kit. Kit shows oil contaminants in a full report.
|
||