Tel: (610)-970-8944
Fax: (610)-970-9484
This page was created by a fellow Buick Enthusiast and Owner...
We would like some feedback about what everyone thinks of the site...click here for FEEDBACK
Engine
 |
ESP Engine Girdle The original 20-Bolt engine girdle; designed to save your engine. The ESP Engine Girdle offers the highest level of "Made in the USA" quality materials and craftsmanship. For this reason, the ESP Engine Girdle is preferred by many engine builders when building a high horsepower engine. Proven to strengthen the stock block up to 800+ hp, the girdle is required on engines above 500-550 hp to eliminate main cap walk and ultimately crankshaft failure. The ESP kit includes exclusive ARP hardware, shims, and a custom pick-up tube. We do not supply spacers that may leak and cause oil starvation. The ESP Girdle is CNC machined, utilizes oil drain holes, and is ground flat to 0.002. Unlike Steel caps that may still walk in the block, the ESP Engine Girdle will safely spread the torque load throughout the entire block and not just on one individual cap and main stud set. |
|||
| ESP Engine Girdle | ENG110 | $425.00 | ||
| ESP Hydraulic Lifter ESP Hydraulic Lifter are specially machined to provide vital oil to the lifter walls and the camshaft lobe. These lifters will assist in lubricating the camshaft that is otherwise only lubricated by splash. Every engine built by ESP Products gets these lifters, without question. |
||||
| ESP Hydraulic Lifters | ENG071 | $89.00 | ||
Please note, prices may change without notice.
|
P/N |
Description |
Retail |
Member |
|
|
ENG001 |
86-7 Thermostat 160 degree |
|
$11.00 |
$9.50 |
|
ENG002 |
84-5 Thermostat 160 degree |
$6.00 |
$5.00 |
|
|
ENG010 |
FORGED PISTONS - CUSTOM (JE) |
$645.00 |
$620.00 |
|
|
ENG011 |
ESP FORGED PISTONS 0.020 (CNC) |
|
$599.00 |
$560.00 |
|
ENG012 |
ESP FORGED PISTONS 0.030 (CNC) |
|
$599.00 |
$560.00 |
|
ENG013 |
3.8 FORGED PISTONS STD. |
$399.00 |
$375.05 |
|
|
ENG014 |
3.8 FORGED PISTONS (0.30) |
$399.00 |
$379.05 |
|
|
ENG015 |
HYPEREUTECTIC HT- 16 PISTONS |
$270.00 |
$259.00 |
|
|
ENG016 |
HYPER. HT-16 PISTONS (0.30) |
$270.00 |
$250.00 |
|
|
ENG017 |
HYPER HT-16 (.40) PISTONS |
$280.00 |
$260.00 |
|
|
ENG020 |
3.8 TURBO RINGS STD (DAILY) |
$114.05 |
$99.00 |
|
|
ENG021 |
3.8 TURBO RINGS (.030) (DAILY) |
$114.05 |
$99.00 |
|
|
ENG030 |
3.8 TURBO RINGS (RACE) |
$149.00 |
$125.00 |
|
|
ENG031 |
3.8 TURBO RINGS (.030) (RACE) |
$149.00 |
$125.00 |
|
|
ENG032 |
3.8 TURBO RINGS (FILE FIT) (RACE) (1/16,1/16,3,16) |
$165.87 |
$149.07 |
|
|
ENG040 |
V-6 TURBO MAIN BEARINGS (STD) (PERF) |
$68.45 |
$65.03 |
|
|
ENG041 |
V-6 TURBO MAIN BEARINGS (.001) (PERF.) |
$68.45 |
$65.03 |
|
|
ENG042 |
V-6 TURBO MAIN BEARINGS (.010) (PERF.) |
$68.45 |
$65.03 |
|
|
ENG043 |
V-6 TURBO MAIN BEARINGS (STD) (CLEVITE 77 V) |
$89.25 |
$75.79 |
|
|
ENG050 |
V-6 TURBO ROD BEARINGS (STD) (PERF) |
$59.99 |
$54.38 |
|
|
ENG051 |
V-6 TURBO ROD BEARINGS (.001) (PERF) |
$59.99 |
$54.38 |
|
|
ENG052 |
V-6 TURBO ROD BEARINGS (.010) (PERF.) |
$59.99 |
$54.38 |
|
|
ENG053 |
V-6 TURBO CAM BEARING |
$27.00 |
$19.99 |
|
|
ENG054 |
V-6 TURBO CAM BEARING (PERF) |
$38.00 |
$30.00 |
|
|
ENG055 |
V-6 TURBO CAM BEARING (14- BOLT ONLY) |
$27.00 |
$19.99 |
|
|
ENG056 |
V-6 TURBO CAM BEARING (PERF) 10 OVER |
$45.00 |
$42.75 |
|
| ENG058 | V-6 TURBO CAM BEARING (14- BOLT ONLY) [Oil Groove #1] | $45.00 | $42.75 | |
|
ENG060 |
DOUBLE ROLLER TIMING CHAIN KIT V6 |
$70.00 |
$60.70 |
|
|
ENG062 |
DOUBLE ROLLER TIMING CHAIN KIT - .005 UNDERSIZE |
$115.00 |
$97.75 |
|
|
ENG070 |
HYDRAULIC LIFTERS TURVO V6 |
$60.00 |
$50.00 |
|
|
ENG071 |
ESP HYDRAULIC LIFTERS HIGH OIL TURBO V6 |
|
$89.00 |
$85.00 |
|
ENG072 |
HYDRAULIC LIFTERS (GM) TURBO V6 |
$131.95 |
$125.40 |
|
|
ENG080 |
OIL PUMP THRUST PLATE |
$25.00 |
$19.00 |
|
|
ENG081 |
STD OIL PUMP G.N. TTYPE |
$39.00 |
$29.00 |
|
|
ENG082 |
HIGH VOLUME OIL PUMP G.N. TTYPE |
$64.00 |
$51.00 |
|
|
ENG083 |
XTRA HIGH VOL OIL PUMP |
$85.00 |
$63.00 |
|
|
ENG090 |
REPLACEMENT MOTOR MOUNT (LT) |
$20.00 |
$17.00 |
|
|
ENG091 |
REPLACEMENT MOTOR MOUNT (RT) |
$20.00 |
$17.00 |
|
| ENG092 | Polyurethane Engine Mount (Left) | $125 | $119 | |
| ENG093 | Polyurethane Engine Mount (Right) | $125 | $119 | |
|
ENG100 |
STEEL MAIN CAP FRT. (TURBO V6) |
$86.00 |
$80.40 |
|
|
ENG101 |
STEEL MAUIN CAPS CENTER (TURBO V6) |
$175.00 |
$160.00 |
|
|
ENG102 |
STEEL MAIN CAP RR. (TURBO V6) |
$271.70 |
$253.26 |
|
|
ENG110 |
ESP ENGINE MAIN GIRDLE KIT (20-BOLT) |
|
$425.00 |
$392.50 |
ENG112 |
ESP ENGINE MAIN GIRDLE KIT (14- BOLT) |
|
$425.00 |
$392.50 |
|
ENG120 |
REPLACEMENT ROCKER ARM ASSEMBLY (PAIR) |
$121.55 |
$113.90 |
|
|
ENG130 |
STOCK TIMING CHAIN COVER |
$155.00 |
$140.00 |
|
|
ENG131 |
HI- VOLUME TIMING COVERW/ OIL PUMP |
$185.20 |
$173.89 |
|
|
ENG140 |
OIL PUMP HOUSING W/ STOCK GEARS |
$50.62 |
$45.55 |
|
|
ENG141 |
OIL PUMP HOUSING W/O STOCK GEARS |
$35.00 |
$31.00 |
|
|
ENG142 |
OIL COOLER ADAPTER & FITTINGS |
$44.00 |
$41.80 |
|
|
ENG152 |
STOCK PUSH ROD G.N. TTYPE |
$45.00 |
$40.00 |
|
|
ENG153 |
CHROM. MOLY PUSH RODS G.N. TTYPE |
$130.00 |
$122.00 |
|
|
ENG160 |
TURBO VALVE SPRINGS (12) |
$64.35 |
$60.30 |
|
|
ENG161 |
TURBO VALVE SPRING RETAINERS (12) |
$80.65 |
$75.58 |
|
|
ENG162 |
TURBO VALVE SPRING LOCKS (24) |
$28.31 |
$26.90 |
|
|
ENG163 |
TURBO VALVE SPRING LOCKS (24) (+50) |
$28.31 |
$26.90 |
|
|
ENG170 |
STAINLESS STEEL VALVES |
$265.00 |
$245.35 |
|
|
ENG180 |
ROLLER LIFTERS (HYDRAULIC) |
$399.00 |
$379.00 |
|
|
ENG181 |
ROLLER CAM SPRINGS |
$75.00 |
$62.00 |
|
|
ENG182 |
MOD DISTRIBUTOR GEAR (Odd fire nose) limited number |
$67.00 |
$63.00 |
|
|
ENG183 |
FUEL PUMP ECCENTRIC (Odd fire nose) limited number |
$28.00 |
$25.00 |
|
|
ENG184 |
ROLLER CAM BUMPER |
$40.00 |
$38.00 |
|
|
ENG185 |
ROLLER CAM Double Roller Timing Chain kit |
$70.00 |
$59.00 |
|
|
ENG186 |
ROLLER PUSH RODS |
$40.00 |
$37.40 |
|
| ENG187 | ROLLER CAM Double Roller Timing Chain kit (-.005) | $120.00 | $108.00 | |
|
ENG190 |
TORRINGTON THRUST BUMPER |
$21.00 |
$20.00 |
|
|
ENG200 |
PRE/ POST ENGINE/ TURBO LUBER (50-55 PSI) |
$550.00 |
$525.00 |
|
|
ENG221 |
DUAL FAN KIT (2500 CFM) (LOW PROFILE) |
$299.00 |
$285.00 |
|
|
ENG230 |
PCV VALVE (TURBO BUICK) |
$9.90 |
$7.40 |
|
|
ENG231 |
PCV VALVE GROMMET 86-87 |
$9.00 |
$8.50 |
|
| ENG232 | PCV Check Valve Assembly (aftermarket) | $22.00 | $20.00 | |
|
ENG251 |
RECONDITIONED STOCK CRANKSHAFT w/o core |
$450.00 |
$400.00 |
|
|
ENG260 |
STOCK REPLACEMENT HARMONIC BALANCER Disc. 5/05 |
$97.24 |
$91.12 |
|
| ENG262 | SFI Harmonic Balancer w/ Interupter Ring (External) | $475.00 | $451.00 | |
| ENG263 | SFI Harmonic Balancer w/ Interupter Ring (Internal) | $431.00 | $409.00 | |
|
ENG270 |
FLEXPLATE ASSEM. 86-7 G.N. TTYPE |
$60.00 |
$56.00 |
|
| ENG271 | SFI Flexplate Turbo Buick (External) | $289.00 | $279.00 | |
| ENG272 | SFI Flexplate Turbo Buick (Internal) | $245.00 | $237.00 | |
|
ENG280 |
ENIGNE TO HEAD DOWELS (4) |
$1.00 |
$0.82 |
|
|
ENG290 |
TIMING CHAIN TENSIONER 231 TURBO |
$4.40 |
$4.13 |
|
|
ENG300 |
OIL PAN PICK UP TUBE |
$20.00 |
$19.00 |
|
|
ENG312 |
STOCK OIL PAN (20 BOLT) (OUTRIGHT) Disc. |
$86.00 |
$82.00 |
|
|
ENG330 |
STOCK SERPENTINE BELT |
$42.00 |
$37.00 |
|
| ENG331 | SERPENTINE BELT TENSIONER ASSEMBLY | $145.00 | $120.00 | |
| ENG332 | A/C Delete bracket and Pulley | $59.00 | $55.00 | |
| ENG333 | Serpentine Belt for A/C Delete Bracket and Pulley | $39.00 | $35.00 | |
|
ENG350 |
STOCK SPEEDO CABLE |
$41.00 |
$39.33 |
|
|
ENG360 |
ACCELERATOR CABLE |
$18.00 |
$16.00 |
|
|
ENG380 |
FACTORY THERMOSTAT OUTLET |
$25.00 |
$22.00 |
|
|
ENG390 |
STOCK WATER PUMP |
$52.00 |
$49.20 |
|
|
ENG400 |
TURBO 6 TALL ALUMINUM VALVE COVERS |
$169.00 |
$164.00 |
|
ENG413 |
Aluminum Radiator - 2 Row w/ 1" Tubes w/ Transmission Cooler |
$540.00 |
$510.00 |
|
|
ENG420 |
WATER- WETTER RADIATOR ADDITIVE |
$9.50 |
$8.55 |
|
| ENG421 | Evans Cooling System (Sold Per 1 gallon) | $34.00 | $32.00 | |
|
ENG430 |
FREEZE PLUG KIT 231 TURBO V-6 |
$12.00 |
$10.00 |
|
|
ENG450 |
HEATER CONTROL VALVE |
$40.00 |
$37.00 |
|
| ENG520 | 3.8 & 4.1 Custom Built Engine (Built to your spec's) | Call for quote | Call for quote | |
|
ENG540 |
6.0 CONNECTINR RODS |
$640.00 |
$600.00 |
|
|
ENG541 |
6.5 CONNECTING RODS |
$1,065.00 |
$1,020.00 |
|
| ENG542 | 5.96" Steel Connecting Rod (stock length) | $640.00 | $600.00 | |
ENG554 |
3.4 STROKE STEEL CRANK (4340) Internal Balance |
$625.00 |
$600.00 |
|
|
ENG551 |
CUSTOM STROKE STEEL CRANK (FORGED) |
$675.00 |
$650.00 |
|